Failure analysis installation of briquetting machine

1, high pressure briquetting machine repeatedly restart

High pressure briquetting machine repeatedly restart usually is caused by low power supply power, not enough to drive briquetting machine working properly. First test with a multimeter to detect high pressure briquetting machine supply voltage, measure should be took under theload open situation, to determine whether there is power supply problem. Particular note is the outdoor high pressure briquetting machine wasting power are different extremely between the heater open and closed, the power supply must consider the maximum power of the briquetting machine, to ensure enough power unit to drive the briquetting machine work normally.

2, video rolling

The high pressure briquetting machine video images roll on the monitor, this phenomenon is mostly caused by video synchronization. The machine mostly automatically synchronized according to the phase of the AC power, adjust the machine's menu and choose the phaseautomatic synchronization function. If because the power phase led to the automatic synchronization fails, you can set the phase value in the menu of the high pressure briquetting machine to solve synchronization problems.

3, control garbled

When the high pressure briquetting machine rotates randomly, first check whether the center equipment has malfunction, and then check whether the high pressure briquetting machine menu starts random scan mode. If the above steps are normal, mostly due to the data communication line interference, uninterrupted sent garbled information. Interference mainly comes from electromagnetic interference on the transmission path, while the optical deviation may also occur in the photoelectric restore.