How to judge the quality of briquette machine?

The materials after being pressed by the briquette machines have convenient transportation and storage, which effectively improve the utilization rate of waste, so to bring good economic benefits and social benefits for the big, medium and small enterprises. Therefore, it is widely used in various materials pressing operations such as iron powder, slag, steel slag, iron oxide and refractory materials. In order to judge whether the processing technology of briquette machine is good or bad, it should be judged from the casting materials of the machine, motor configuration and pressure roller quality, each component of welding technology have to observe. Although the briquette machine has concentrated advantages of various briquettes making equipment, only buy high-quality briquette machine can it play its function. Here, the research and production staff of briquette machine reminds customers that in the purchase of briquette, you must notice the processing technology.

 

The roller is the important part of briquette machine, the materials with Mn65 is good, the 9Cr2 is excellent. While the poor factory production of roller material basically has not reached the standard of Mn65.still less 9Cr2. Inferior the roller for a period of time will have to be replaced, which is a waste of human and financial resources,so it is important for user to chose the briquette machine which has a long using life roller,the 9Cr2 roller can be used for 10 months, but 65Mn only has 3 months life. When buying the briquette machine, user should ask manufacturers about roller material, If necessary, inspect it.

 

Checking the weight of briquette machine, the poor factory offer user the poor machine, the whole weight is light, materials of machine is so cheap cost and not durable, that machine work not stably, bring much trouble to user. The quality manufactuer produce briquette machine using the quality steel materials, no matter rollers, main shafts, reducers, coupling, oil pump, gears and bearings, every parts of machine meet international standard, so the whole weight of briquette machine must be heavy and worked stably.

 

Reducer is the transmission part of briquette machine, the motor has to be copper core; otherwise, check if the finished pressing strength can reach up to standard requirements. Reducer must find the regular manufacturers, and its casing and ratio are the most important things.

 

After the purchasing briquette machines, it can enter the debugging stage. At this time, consider whether it need to add adhesive during the pressing process. Pay attention to the following problems: what standards the pressing strength has to achieve, how to deal with the products, how to reduce the breakage rate of product, etc. After considering these problems, you can safely run production.