Trial Runs for Zhongzhou Coal Briquette Press Machine

Coal briquette press machine, featured in the high working efficiency, wide application ranges and strong working capacity, is regarded as the most ideal machine to produce the coal briquettes. The following content will discuss about the trail run for newly-purchased coal briquette press.

As to the trail run of coal briquette plant without any load inside, it includes many details. During this process, you should check whether the running direction of dynamo is right or not. Meanwhile, you should notice the temperature rise of bearings and oil addition for lubricating bearings. If abnormal situations exist, you should immediately shut down the machine and check failures. After dealing them, you should make a trail run again. Remember, the coal briquette press machine should have no load inside.

As to the trail run for coal briquette press machine with certain load, it is the premise for feeding work. If this trail run is normal, feeding work will be able to begin. During this process, there are several key points needing for notice and checks like number of electric current and discharging work of chute. If there are something wrong, you should immediately shut down the machine and solve failures.

In general, the above two trail runs should be carried out for about 4-8 hours. Of course, this time slot is suitable to the situation that no failure occur. If failures exist, the time should be counted again. Known as the NO.1 brand of coal briquette press machine, Zhongzhou briquette press machine manufacturer welcomes any messages that you leave on our website. Discounts for you on website!